Synthesis and characterization of water-soluble C₆₀–peptide conjugates

• Yue Ma,
• Lorenzo Persi and
• Yoko Yamakoshi

Beilstein J. Org. Chem. 2024, 20, 777–786, doi:10.3762/bjoc.20.71

• suitable for the coupling to peptides on resin, prepared by solid-phase peptide synthesis (SPPS) [35]. The detailed conditions for the amide-forming reaction were optimized using biscarboxylic acid-substituted C60 derivative 3 and a similar peptide with a primary amine derived from γ-aminobutyric acid

Chemoenzymatic synthesis of macrocyclic peptides and polyketides via thioesterase-catalyzed macrocyclization

• Senze Qiao,
• Zhongyu Cheng and
• Fuzhuo Li

Beilstein J. Org. Chem. 2024, 20, 721–733, doi:10.3762/bjoc.20.66

• attention is given to the strategies of mimics formation to demonstrate how biocatalysis provides an elegant link between chemistry and biology. Review Macrocyclic peptides Since first being reported in the 1960s [26], solid-phase peptide synthesis (SPPS) has been an invaluable tool for preparing numerous

• aforementioned NPRS macrocycles, the synthesis of macrocylic polyketides and PKS/NRPS hybrids is more challenging due to the absence of a streamlined preparation strategy such as solid-phase peptide synthesis (SPPS). In enzymology studies, it was common to hydrolyze the cyclic natural products in order to obtain

Linker, loading, and reaction scale influence automated glycan assembly

• Marlene C. S. Dal Colle,
• Manuel G. Ricardo,
• Nives Hribernik,
• José Danglad-Flores,
• Peter H. Seeberger and
• Martina Delbianco

Beilstein J. Org. Chem. 2023, 19, 1015–1020, doi:10.3762/bjoc.19.77

• scale [19], and linkers [20][21] affect the overall yield of solid phase peptide synthesis (SPPS). In the past decades, several supports and linkers have been developed and commercialized for SPPS, enabling a wide range of applications. Solid supports are available with different linker loadings, with

Synthesis and bioactivity of pyrrole-conjugated phosphopeptides

• Qiuxin Zhang,
• Weiyi Tan and
• Bing Xu

Beilstein J. Org. Chem. 2022, 18, 159–166, doi:10.3762/bjoc.18.17

• solid-phase peptide synthesis (SPPS) to generate the peptide segments ((G/GG/GGG)ffpy for 2a–h, 9, 10a,b, GGGFFpY for 3a,b, GGGffps for 4a,b, GGGffpS for 5a,b, aaaffpy for 6a–c, rffpy for 7, GGllllpy for 8a,b, GGGffy for 11a,b, aaaffy for 12a–c, NBD-ffky for 13, NBD-ffkpy for 14, GG(G) for 15a–c). Then

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• organoboron containing side chain in the i + 4-position. The peptides were synthesised on Rink amide resin by solid-phase peptide synthesis (SPPS) with Fmoc/t-Bu strategy followed by on-resin SMC. For the cross-coupling, a modified protocol by Planas and co-workers was used [78]. Pd2(dba)3 was employed as the

First total synthesis of hoshinoamide A

• Haipin Zhou,
• Zihan Rui,
• Yiming Yang,
• Shengtao Xu,
• Yutian Shao and
• Long Liu

Beilstein J. Org. Chem. 2021, 17, 2924–2931, doi:10.3762/bjoc.17.201

• in Scheme 1, we initially tested Fmoc solid-phase peptide synthesis (SPPS) [13] to get 2-chlorotrityl resin-bound Pro1-(N-Me)-Phe2 dipeptide 2 under the conditions of HCTU and DIPEA. Unfortunately, the N-Me coupling proceeded in low yield (<10%). In order to improve the coupling yield of the hindered

Synthesis and physicochemical evaluation of fluorinated lipopeptide precursors of ligands for microbubble targeting

• Masayori Hagimori,
• Estefanía E. Mendoza-Ortega and
• Marie Pierre Krafft

Beilstein J. Org. Chem. 2021, 17, 511–518, doi:10.3762/bjoc.17.45

• safety [15][16][17]. Various effective receptor-binding peptides have been identified by the phage display technology [18]. The peptides can be readily prepared through solid-phase peptide synthesis (SPPS), a highly reproducible method with minimal side reactions. Many peptide–lipid conjugates

• . General procedure for the synthesis of perfluoroalkylated lipopeptides. All F-lipopeptides (SG)5-KSS-K(C2H4-CnF2n+1)2 with n = 6 (1), 7 (2), 8 (3) and hydrocarbon analog (SG)5-KSS-K(C10H21)2 were synthesized using an Fmoc solid-phase peptide synthesis (SPPS) method. Rink Amide AM resin (0.1 mmol) in a 10

¹⁹F NMR as a tool in chemical biology

• Diana Gimenez,
• Aoife Phelan,
• Cormac D. Murphy and
• Steven L. Cobb

Beilstein J. Org. Chem. 2021, 17, 293–318, doi:10.3762/bjoc.17.28

• -phase peptide synthesis (SPPS) methods (15 and 16, Figure 1). A second well-established methodology for the 19F isotopic labelling of protein and peptides involves the post-translational chemical conjugation of an 19F probe to specific amino acids present within the protein, typically cysteine and

• aliphatic amino acid, (E)-2-amino-5-(pentafluorosulfanyl)pent-4-enoic acid (14, Figure 1), SF5NVa [21]. Most recently, Cobb et al. [22] reported the synthesis of several pentafluorosulfanyl phenylalanine derivatives with suitable protecting groups to allow incorporation into peptides through common solid

Enzyme-instructed morphological transition of the supramolecular assemblies of branched peptides

• Dongsik Yang,
• Hongjian He and
• Bing Xu

Beilstein J. Org. Chem. 2020, 16, 2709–2718, doi:10.3762/bjoc.16.221

• form the branched peptide 1. To investigate how the acetylation of aspartic acid affects the proteolysis and the formation of assemblies, the acetylation of the N-terminal of the branch in 1 would generate 2. Synthesis We used 2-chlorotrityl chloride resin for the typical Fmoc solid-phase peptide

• synthesis (SPPS) [47] to produce the peptides shown in Scheme 1. We first synthesized the peptide segments (i.e., Fmoc-DEDDDLLIG (1a) and acetyl-DEDDDLLIG (2a)). We kept the tert-butyl protecting groups of aspartic acid for the coupling reaction with Nap-ffky. We used 2,2,2-trifluoroethanol (TFE) in

Synthesis and conformational preferences of short analogues of antifreeze glycopeptides (AFGP)

• Małgorzata Urbańczyk,
• Michał Jewgiński,
• Joanna Krzciuk-Gula,
• Jerzy Góra,
• Rafał Latajka and
• Norbert Sewald

Beilstein J. Org. Chem. 2019, 15, 1581–1591, doi:10.3762/bjoc.15.162

• (O)Ac N-terminal), 170.0 (C(O) Gal), 172.2 (C(O) Ala4), 172.7 (C(O) Ala5), 172.8 (C(O) Ala1), 173.2 (C(O) Ala2). Glycosylated building blocks prepared for solid phase peptide synthesis (SPPS). Model AFGP analogues. Conformational preferences of investigated glycopeptides. Conformational preferences

Novel solid-phase strategy for the synthesis of ligand-targeted fluorescent-labelled chelating peptide conjugates as a theranostic tool for cancer

• Sagnik Sengupta,
• Mena Asha Krishnan,
• Premansh Dudhe,
• Ramesh B. Reddy,
• Bishnubasu Giri,
• Sudeshna Chattopadhyay and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2018, 14, 2665–2679, doi:10.3762/bjoc.14.244

• peptide synthesis (SPPS) as well as in chemical synthesis were purchased from Iris Biotech GmbH, Sigma-Aldrich, Merck and Spectrochem. Dry solvents were prepared by using drying agents and following usual methods. Peptide syntheses were carried out in sintered glass peptide vessels (Chemglass) by standard

• can be employed as potential theranostic tools by attaching macromolecules, cytotoxic warheads, radioactive tracers, nanomaterials etc., via the chelating core. Experimental Materials and methods H-Cys-2-ClTrt resin, Fmoc amino acids and amide coupling agents, reagents and solvents used in solid-phase

Comparative cell biological study of in vitro antitumor and antimetastatic activity on melanoma cells of GnRH-III-containing conjugates modified with short-chain fatty acids

• Eszter Lajkó,
• Sarah Spring,
• Rózsa Hegedüs,
• Beáta Biri-Kovács,
• Sven Ingebrandt,
• Gábor Mező and
• László Kőhidai

Beilstein J. Org. Chem. 2018, 14, 2495–2509, doi:10.3762/bjoc.14.226

• peptide synthesis (SPPS) using Fmoc/t-Bu strategy with the orthogonal protecting scheme as described before [17][19] and presented in detail in Supporting Information File 1. In all cases, a Mtt (methyltrityl) protecting group was applied to block the side chain of Lys in position 8. For the development

• antiproliferative/cytotoxic activities, the cell adhesion and migration modulator effects of conjugates and their ability to induce apoptosis or cell cycle arrest in A2058 melanoma cell line. Results and Discussion Synthesis of Dau–GnRH-III conjugates The modified GnRH-III derivatives were prepared by solid phase

Defining the hydrophobic interactions that drive competence stimulating peptide (CSP)-ComD binding in Streptococcus pneumoniae

• Bimal Koirala,
• Robert A. Hillman,
• Erin K. Tiwold,
• Michael A. Bertucci and
• Yftah Tal-Gan

Beilstein J. Org. Chem. 2018, 14, 1769–1777, doi:10.3762/bjoc.14.151

• ), homophenylalanine (hPhe), or Tyr; Figure 3). The CSP1 analogs were constructed using standard solid-phase peptide synthesis (SPPS) protocols (see Materials and Methods for SPPS procedures), followed by purification to homogeneity by semipreparative RP-HPLC (see the Supporting Information File 1 for full

• . All the CSP1 analogs were synthesized on a 4-benzyloxybenzyl alcohol (Wang) resin (0.65 mmol/g) pre-loaded with Fmoc-L-Lys(Boc). With the exception of the phenylglycine and norvaline derivatives, the CSP1 analogs were synthesized using standard Fmoc-based solid-phase peptide synthesis (SPPS

Drug targeting to decrease cardiotoxicity – determination of the cytotoxic effect of GnRH-based conjugates containing doxorubicin, daunorubicin and methotrexate on human cardiomyocytes and endothelial cells

• Livia Polgár,
• Eszter Lajkó,
• Pál Soós,
• Orsolya Láng,
• Marilena Manea,
• Béla Merkely,
• Gábor Mező and
• László Kőhidai

Beilstein J. Org. Chem. 2018, 14, 1583–1594, doi:10.3762/bjoc.14.136

• here are shown in Figure 1 and Figure 2. The GnRH derivatives were prepared by solid phase peptide synthesis (SPPS) according to Fmoc/t-Bu strategy (Supporting Information File 1). Three drug molecules, doxorubicin (Dox), daunorubicin (Dau) and methotrexate (Mtx), were employed in the preparation of

Design and biological characterization of novel cell-penetrating peptides preferentially targeting cell nuclei and subnuclear regions

• Anja Gronewold,
• Mareike Horn and
• Ines Neundorf

Beilstein J. Org. Chem. 2018, 14, 1378–1388, doi:10.3762/bjoc.14.116

• synthesized using a combination of standard Fmoc/t-Bu solid-phase peptide synthesis (SPPS) on a Syro I peptide synthesizer (MultiSynTech, Bochum, Germany) and manual coupling protocols according to previous works [17][19][20]. Peptides were generated on a Rink amide resin (loading 0.48 mmol/g) yielding C

Recyclable hypervalent-iodine-mediated solid-phase peptide synthesis and cyclic peptide synthesis

• Dan Liu,
• Ya-Li Guo,
• Jin Qu and
• Chi Zhang

Beilstein J. Org. Chem. 2018, 14, 1112–1119, doi:10.3762/bjoc.14.97

• worth noting that FPID can be readily regenerated after the peptide coupling reaction. Keywords: cyclic peptide; FPID; hypervalent iodine(III) reagent; recyclable; solid-phase peptide synthesis (SPPS); Introduction The amide bond is one of the most fundamental functional groups in organic chemistry

• peptide synthesis and cyclic peptide synthesis. Results and Discussion At the beginning of our study, we tried to utilize the system of FPID/(4-MeOC6H4)3P in the solid-phase peptide synthesis (SPPS). SPPS has been widely employed in peptide synthesis since its first report by Merrifield in 1963 [30][31

Recent progress in the racemic and enantioselective synthesis of monofluoroalkene-based dipeptide isosteres

• Myriam Drouin and
• Jean-François Paquin

Beilstein J. Org. Chem. 2017, 13, 2637–2658, doi:10.3762/bjoc.13.262

• alkene analogues (Table 4). Comparison between Phe-ψ[(Z)-CF=CH]-Gly and Phe-ψ[(E)-CF=CH]-Gly isosteres and their alkene analogues was also performed in an antagonist activity study towards GPR54. The fluorinated isosteres were incorporated into pentapeptides using Fmoc solid phase peptide synthesis (SPPS

Peptide synthesis: ball-milling, in solution, or on solid support, what is the best strategy?

• Ophélie Maurin,
• Pascal Verdié,
• Gilles Subra,
• Frédéric Lamaty,
• Jean Martinez and
• Thomas-Xavier Métro

Beilstein J. Org. Chem. 2017, 13, 2087–2093, doi:10.3762/bjoc.13.206

• Abstract While presenting particularly interesting advantages, peptide synthesis by ball-milling was never compared to the two traditional strategies, namely peptide syntheses in solution and on solid support (solid-phase peptide synthesis, SPPS). In this study, the challenging VVIA tetrapeptide was

• research laboratories and for industrial production: synthesis in solution and synthesis on a solid support (also known as solid-phase peptide synthesis, SPPS). Indeed, liquid reaction mixtures enable efficient agitation when using a conventional batch reactor equipped with either magnetic stirring bar or

Enduracididine, a rare amino acid component of peptide antibiotics: Natural products and synthesis

• Darcy J. Atkinson,
• Briar J. Naysmith,
• Daniel P. Furkert and
• Margaret A. Brimble

Beilstein J. Org. Chem. 2016, 12, 2325–2342, doi:10.3762/bjoc.12.226

• et al. [47]. These syntheses substituted the enduracididine residue for the more readily available L-arginine. The total synthesis of the full teixobactin structure was completed in 2016 by Payne et al. [72] using Fmoc solid-phase peptide synthesis (SPPS). The key to the synthesis was access to the

Synthesis and evaluation of the biostability and cell compatibility of novel conjugates of nucleobase, peptidic epitope, and saccharide

• Dan Yuan,
• Xuewen Du,
• Junfeng Shi,
• Ning Zhou,
• Abdulgader Ahmed Baoum,
• Khalid Omar Al Footy,
• Khadija Omar Badahdah and
• Bing Xu

Beilstein J. Org. Chem. 2015, 11, 1352–1359, doi:10.3762/bjoc.11.145

• designed the nucleopeptides 5 and 6. In addition, we substituted thymine with adenine to generate nucleopeptides 7 and 8 that contain adenine, the nucleobase is complementary of thymine. Synthesis The NA conjugates 5–8 were obtained according to a facile method of solid-phase peptide synthesis (SPPS) [17

Synthesis of novel conjugates of a saccharide, amino acids, nucleobase and the evaluation of their cell compatibility

• Dan Yuan,
• Xuewen Du,
• Junfeng Shi,
• Ning Zhou,
• Abdulgader Ahmed Baoum and
• Bing Xu

Beilstein J. Org. Chem. 2014, 10, 2406–2413, doi:10.3762/bjoc.10.250

• synthesis of a novel type of conjugate of three fundamental biological build blocks (i.e., saccharide, amino acids, and nucleobase) and their cell compatibility. The facile synthesis starts with the synthesis of nucleobase and saccharide derivatives, then uses solid-phase peptide synthesis (SPPS) to build

• . Synthesis Schemes 1–4 show the syntheses of the SAN conjugates formed by the reaction of the amino acid segment with the nucleobase and the saccharide derivative. The key steps include N-alkylation, acetylation, solid-phase peptide synthesis (SPPS) and N-hydroxysuccinimide (NHS)/N,N-diisopropylcarbodiimide

Convergent synthetic methodology for the construction of self-adjuvanting lipopeptide vaccines using a novel carbohydrate scaffold

• Vincent Fagan,
• Istvan Toth and
• Pavla Simerska

Beilstein J. Org. Chem. 2014, 10, 1741–1748, doi:10.3762/bjoc.10.181

• previously reported carbohydrate-based vaccine constructs [11] were prepared by a divergent approach, where the carbohydrate core was coupled to the resin-bound LCP adjuvanting moiety, followed by stepwise synthesis of the B cell epitopes using solid-phase peptide synthesis (SPPS). Using this divergent

Design, automated synthesis and immunological evaluation of NOD2-ligand–antigen conjugates

• Marian M. J. H. P. Willems,
• Gijs G. Zom,
• Nico Meeuwenoord,
• Ferry A. Ossendorp,
• Herman S. Overkleeft,
• Gijsbert A. van der Marel,
• Jeroen D. C. Codée and
• Dmitri V. Filippov

Beilstein J. Org. Chem. 2014, 10, 1445–1453, doi:10.3762/bjoc.10.148

• . We here describe the assembly of MDP building blocks, suitable for automated solid phase peptide synthesis (SPPS), their use in the assembly of the four MDP-antigen conjugates 2–5 and the immunological evaluation of the constructs. Results and Discussion Synthesis of the conjugates The MDP-antigen

• conjugates 2–5 were prepared using an automated solid-phase peptide synthesis (SPPS) protocol. In all these syntheses commercially available Tentagel S RAM resin and amino acids were applied. The synthesis of the required MDP building blocks 10 and 16 is depicted in Scheme 1. The 3-azidopropanol spacer was

Automated solid-phase peptide synthesis to obtain therapeutic peptides

• Veronika Mäde,
• Sylvia Els-Heindl and
• Annette G. Beck-Sickinger

Beilstein J. Org. Chem. 2014, 10, 1197–1212, doi:10.3762/bjoc.10.118

• their respective targets have led to tremendous progress for therapeutic applications in the last years. In order to increase the drugability of these frequently unstable and rapidly cleared molecules, chemical modifications are of great interest. Automated solid-phase peptide synthesis (SPPS) offers a

• intravenous) application, have prompted further research in this field [14]. Therefore, methods to prolong peptide stability are of great interest. Here, we highlight the importance of automated solid-phase peptide synthesis (SPPS) in the process of peptide modification. Principles of chemical synthesis of

Amino acid motifs in natural products: synthesis of O-acylated derivatives of (2S,3S)-3-hydroxyleucine

• Oliver Ries,
• Martin Büschleb,
• Markus Granitzka,
• Dietmar Stalke and
• Christian Ducho

Beilstein J. Org. Chem. 2014, 10, 1135–1142, doi:10.3762/bjoc.10.113

• -Fmoc-protected building blocks potentially suitable for solid-phase peptide synthesis (SPPS). It is well established that O-acylated β-hydroxy-α-amino acids can be used in Fmoc-strategy peptide syntheses without migration of the acyl unit [37][38][39]. Based on these findings, we have desired to

• -phase peptide synthesis (SPPS). Furthermore, we have employed such building blocks for the synthesis of protected analogues 15a,b of the tripeptide unit of naturally occurring muraymycin nucleoside antibiotics. We have also established unprecedented protocols for early- and late-stage derivatizations of

• (2S,3S)-3-hydroxyleucine building blocks employing stereoisomerically pure amino alcohol 5 [32]. Applying different protecting group strategies, we were able to prepare (2S,3S)-3-hydroxyleucine derivatives suitable for further modification both at the carboxy and the amino moiety, as well as for solid